Automotive products // Products // Anti-Trap Power Window & Power Door Locks

< back

In Taiwan, a 4-year-old boy was trapped accidentally by a power window and strangled to death in the early of this year. Available statistics on such accidents showed 58 fatalities over the last couple of decades in the United States, and an estimated 500 people (half of them children) treated annually in hospital emergency rooms for injuries related to power windows. To enhance safety, both the auto industry and the Consumer Council have recommended that all power windows should be equipped with auto-reverse sensors so that when the window strikes an obstruction on the way up it could automatically reverse

  • Anti-trap Power Window system ensures safety
  • Power Door/Window ensures comfort of driving
  • Optional integration of networking functions (Gateway CAN Bus 2.0 A)
  • Optional: Diagnostic Display to show state of devices

Power Window

  1. Automatic Up/Down - You tap and release the down switch and the window goes all the way up. This feature uses a control unit that monitors the amount of time you hold the switch down (depends on client specification). If the switch is pressed for less than the specified specification, the window will stop when you release the button. If you hold the switch down for longer than that, the window will go all the way up
  2. Anti-Trap function- The intelligent anti-trap function ensures a safe closure of car side windows
  3. The Power window system has a self learning system and automatically calibrate itself depending of the resistance offered by the door panel
  4. Custom connection plugs for different car door system

Power Door Locks

  1. Door open/close by pressing one-touch buttons
  2. The button sends the information to a controller which sends signal to open/close the door
  3. Keyless entry system (Optional)

Anti-Trap Window


Power Control Switches


Working Principal

By pressing the button signals are sent to controller which decides when to lock/unlock the door and the windows

Technical Parameter
Radiated Emission
  • IEC CISPR 25
  • GM9114P

  • Radiated Immunity
  • IEC61000-4-21
  • ISO11452-2

  • Transient Immunity
  • ISO7637-2.3
  • ISO7637-3

  • Electrostatic Discharge
  • ISO10605
  • Operation temperature
  • -20 to 85 deg C

  • Operation humidity
  • 15% to 99% RH

  • Storage humidity
  • 5% to 99% RH
  • :: TOP ::

        Copyright (C) 2008 Info Tronic International Ltd.